The Upper Jacket is the middle part of the jacket wind foundation. The Lower Jacket is the bottom part of the jacket wind foundation. The Lower and Upper Jacket is called the support structure. The main function of the support structure is to transfer loads from the turbine to the ground, allow access to the […]

The Transition Piece is the top part of the jacket wind foundation. The transition piece transfers the loads and weight of the wind turbine tower and generator to the jacket support structure legs. In the transition piece, the work platform and boat landing area gives access for installation and maintenance of the wind turbine. Product […]

Our segment factory can join tubulars into pin piles or jacket segments for offshore structures. Product Range and Capacity Diameter: up to 15 m Wall thickness: up to 197 mm Length: up to 120 m Weight: up to 600 ton Capacity: 10,000 ton per month

Our tubular factory can be assembled into jackets or pin piles or other offshore structures. Product Range and Capacity Diameter: up to 15 m Wall thickness: up to 197 mm Length: JCO line: 12,000㎜/ single pipe or can Roll bending line: 4,200㎜/ single pipe or can Capacity: 10,000 ton per month  

Monopile (MP) consist of a central support tube, which is piled into the seabed, this structure provides secure stability. Monopile foundation has the advantage that it is relatively quick to install and that no major preparatory work is necessary on the seabed. Another advantage is the low maintenance after installation. Product Range and Capacity Diameter: […]

The wind tower is a main part of the wind turbine. SRE is an experienced wind tower supplier from Vietnam. Product Range and Capacity Diameter: up to 12 m Wall thickness: up to 150 mm Production rate: 4 sets per month